Latest News

** Authors are invited to submit manuscripts for December 2019 issue.

** November 2019 issue of AARF Journals is officially released.

Categories

QR Code

Visitor Counter

Large Visitor Map



S.No Particular Pdf Page No.
1
  • TUNING OF A NOVEL THIRD-ORDER FORWARD COMPENSATOR, PART II: DELAYED INTEGRATING PROCESS


GALAL ALI HASSAAN

Abstract:
The objective of this paper is to investigate the possibility of using a new proposed feedforward third-order compensator to control a delayed integrating process. The compensator is tuned using MATLAB optimization toolbox for different process time delay levels between 0.2 and 7.4 seconds.


1-17
2
  • ARTIFICIAL BEE COLONY – DIFFERENTIAL EVOLUTION (ABC-DE) ALGORITHM FOR CNC TURNING PROCESS OPTIMIZATION


R.S.S. PRASANTH, K. HANS RAJ

Abstract:
Optimization of any machining process is a highly challenging task per se, because it essentially involves prediction of optimal cutting parameters and operating constrains that are complex and very nonlinear in nature and affect the total production time which in turn affects production cost and quality of the work piece.


18-39
3
  • A FACIAL RECOGNITION TECHNIQUE USING PRINCIPAL COMPONENT ANALYSIS


Jyoti Dalal, Mahendra Singh Meena, Priti Singh

Abstract:
This paper describes an efficient face recognition system in order to overcome many of the limitations found in existing facial recognition systems. In this paper the dimensional reduction has been done in order to reduce the dimensions of the image using principal component analysis.


40-45
4
  • FACIAL EMOTION RECOGNITION THROUGH GABOR FILTER AND RBF NETWORKS


Leena Choukiker, Shruti Karkra, Janak B Patel

Abstract:
Human Emotion Recognition plays an vital role in the human-computer interaction (HCI). In this paper, the emotions are detected on segmented image by means of low dimension weighted Gabor filter bank.


46-50
5
  • SMART CONTROL FOR VEHICLE HEADLIGHTS AND REAR-VIEW MIRROR


Kriti Jain, Aakrisht Mishra, Abhishek Aggarwal, Abhishek Sherawat, Chetna Rajpal, Iteshree Sharma

Abstract:
Project SC-HR(Smart Control for Vehicle Headlights and Rear-View mirror) is basically designed and optimized to give people a hand-over on accidents caused by High Beam today (on Highways and in-city basically).


51-66
6
  • ATLAS BASED MEDICAL IMAGE SEGMENTATION TECHNIQUES- A REVIEW


Shruti Karkra, Dr. Janak B. Patel

Abstract:
Cardiac disease is the leading cause of death in the developed and developing countries. To reduce the mortality, early diagnosis is critical. Great research efforts over the last decades have been aimed at revealing the factors responsible for the reduction in function the left ventricle (LV) of the heart.


67-72
7
  • ESTIMATION OF SOLAR ENERGY POTENTIAL OF BUILDING ROOFTOPS USING REMOTE SENSING AND GIS


S. Jayalakshmi

Abstract:
With about 300 clear sunny days in a year, India's theoretical incident solar radiation (insolation), just on its land area, is about 5 PWh/year (i.e. = 5000 trillion kWh/yr). The daily average solar energy incident over India varies from 4 to 7 kWh/m2 with about 2,300–3,200 sunshine hours per year, depending upon location.


73-93
8
  • COMPARATIVE STUDY OF FFT/IFFT PROCESSOR FOR HIGH THROUGHPUT-RATE APPLICATION


Krishan Kumar, Sonal Dahiya

Abstract:
This paper proposes a FFT processor with multiple pipeline architecture for high throughput-rate applications. The power consumption and hardware cost can also be save in this processor by using the higher radix FFT algorithm and less memory and complex multipliers.


94-103
9
  • ANALYZING CRYPTANALYTIC TECHNIQUES OF BLOCK CIPHERS FOR SYMMETRIC ENCRYPTION


N.Sreevidya, K. Srilaxmi, Dr Prasanta Kumar Sahoo

Abstract:
There is a lot of research going on the cryptanalysis techniques. Many authors have suggested different cryptanalytic techniques for Symmetric and Asymmetric Encryptions but this paper discusses the Cryptanalytic techniques of Block Ciphers for Symmetric Encryption.


104-111
10
  • INTELLIGENT BUS MANAGEMENT SYSTEM- A REVIEW


Tanushree Agarwal,Swati Goyal, Chahat Sharma, Ayushi Jain

Abstract:
The classical transportation problem is one of the many well structured problems in the mathematical programming literature that has generated considerable interest.


112-115
11
  • INTELLIGENT BUS MANAGEMENT SYSTEM


Tanushree Agarwal, Varun Singh Chauhan, Kommanaboina Varun

Abstract:
This paper highlights the implementation of an Intelligent Bus Management System to curb the current challenges and problems such as overloading and smoking in the bus.


116-124
12
  • OPTIMIZATION OF PROCESS PARAMETERS FOR FRICTION STIR WELDING ALUMINIUM 6061 USING RESPONSE SURFACE METHODOLOGY


M.Sesha Srinivas, Dr .M.V.R.D Prasad

Abstract:
Friction Stir Welding (FSW) was invented by Wayne Thomas at TWI (The Welding Institute), U.K in December 1991. Since then it has become a major joining process in the aerospace, railway and ship building industries especially in the fabrication of aluminium alloys and many other applications of commercial importance.


125-138
13
  • DESIGN AND IMPLEMENTATION OF MICROCONTROLLER BASED SPEED DATA LOGGER


Kriti Jain, Prem Chand , Saad Shamsi , Dimple Taneja, Rahul Yadav, Sanjeev Yadav

Abstract:
In this project, a data logger for specific application has been designed. This paper discusses a vehicle speed measurement and display/recording system using IR sensor as speed sensor.


139-145
14
  • EFFECT OF CRUSHER DUST ON SHEAR PARAMETERS OF PANTNAGAR SOIL


Naman Agarwal, Ajit Kumar

Abstract:
For the design of earthen dams and embankments shear parameters are required. These are also used in calculating the bearing capacity of soil foundation. This research is an attempt to investigate the effect of Crusher Dust on cohesion and angle of internal friction of Pantnagar soil.


146-150
15
  • EVALUATING THE QUALITY OF SERVICE OF 3G CELLULAR MOBILE NETWORKS IN A DEVELOPING ECONOMY


Lawrence Oborkhale

Abstract:
The last decade has witnessed extreme competition among cellular wireless services providers in developing countries like Nigeria. However, as the competition increases, it has become essential for companies to position themselves appropriately in order to take advantage of their core competencies and to prepare for the emerging telecommunications environment.


151-165
16
  • MEDICAL APPLICATION OF ELECTROMAGNETIC WAVES


Okeke.C. and Iroegbu. C.

Abstract:
Electromagnetic waves are produced by stream of photons travelling in waves. They come in a very wide range of wavelengths, which include radio wave, microwave, infrared (heat), visible light, ultraviolet, X-ray, and gamma-ray waves.


166-174
Collaboration Partners
  • Indian Journals

  • Swedish Scientific
    Publications

  • The Universal
    Digital Library

  • Green Earth Research
    And Publishing House

  • Rashtriya Research Institute
    Of New Medical Sciences

Indexing By